If you have a pressure washer and it isn't a Karcher, Nilfisk or Kranzle pressure washer then keep reading....
If the pressure washer hose that connects to your machine screws on to an M22 male thread on your machine then keep reading....
Want a longer than standard, rubber braided hose and to use it with a Short Quick Release Swivelling Trigger with coloured QR nozzles?
WELL HERE WE GO!!!!
The 7.5M hose comes with an M22 screw thread at one end that screws on to the brass thread of the Short QR Trigger. The other end of the hose comes with the same M22 screw thread to screw onto the pressure washer.
This hose will suit any domestic pressure washer with an M22 screw thread outlet only including and not restricted to:
- LENGTH: 7.5 Metres
- TYPE: 1/4" High Pressure Reinforced Braided Hose
- MAX WORKING PRESSURE: 180 Bar / 2610 PSI
- MAX TEMPERATURE: 60C
- COUPLING (TO MACHINE): M22 Female
- COUPLING (TO SHORT TRIGGER GUN): M22 Female
ENSURE DURING COLDER CONDITIONS, THE WATER IS DRAINED FROM THE HOSE PRIOR TO STORAGE
- Material: Brass,Stainless Steel, Rubber
- Screw Fitting: 1/4" BSP
- Max Pressure: 3600PSI /250bar
- Max Temp: 60 Degrees
- Hole Diameter: 1.0mm
- Nozzles (035): 15° Yellow, 25° Green, 40° White
SHORT QR TRIGGER:
- -100% Brand new and high quality
- -High pressure water gun body, brass fitting
- -High pressure water gun body with trigger lock
- -Easy to use, portable and environmentally friendly
- -High pressure water nozzles attached with different sizes
1 x Quick Release Trigger With Swivel Connection
1 x 7.5M Hose
3 x Quick Release Coloured Nozzles
1 x 1/4" Quick Release Male Snowfoam Connector
Wooden Pallet Not Included