No Products in the Cart
This is a quick release short trigger and 15m rubber hose bundle for Nilfisk C-Series and Titan XTRA machines.
THE SHORT TRIGGER is an Italian Annovi Reverberi MV925 lance with built in swivel, 3 coloured quick release nozzles and a quick release snowfoam adaptor to convert most existing snowfoam lances to quick release to fit the short trigger.
Made in Italy 🇮🇹
Easy pull trigger
Max PSI 4500
Max gallons per minute (GPM): 8
Max temp 160° C
Designed with an easy pull trigger, these guns can be operated without high levels of fatigue or discomfort normally found in high pressure guns.
035 Nozzles: 15° Yellow, 25° Green, 40° White
-100% Brand new, high quality and heavy duty
-Rubberised hand grip for a more comfortable, one handed use
-High pressure body, brass fitting
-High pressure body with trigger lock
-Easy to use, portable and environmentally friendly
-High pressure water nozzles attach with different sizes
DO NOT POINT AT HUMAN BODY AS THIS MAY RESULT IN SERIOUS INJURY
ENSURE THAT THE COLOURED QR NOZZLES ARE SEATED SECURELY IN THE QUICK RELEASE CONNECTOR BEFORE USE
DO NOT CONNECT TO A STEAM CLEANER!!!!
WE RECOMMEND APPLYING THE SUPPLIED PTFE TAPE TO THE MALE THREAD OF THE INCLUDED BRASS THREAD CONVERTER AND ALSO ONTO MALE SCREW THREAD ON THE NILFISK MACHINE
DOMESTIC USE ONLY. NOT FOR COMMERCIAL USE.
1 Nilfisk Quick Release Bundle With Swivel Connection
3 x Quick Release Coloured Nozzles
1 x 1/4" Quick Release Male Snowfoam Connector
THE RUBBER HOSE is also Italian and is a single reinforced steel braided wire rubber coated hose. Each end of the hose has M22 Female connections.
Made in Italy 🇮🇹
LENGTH: 15 Metres
TYPE: 1/4" High Pressure Reinforced Wire Braided Rubber Hose
MAX WORKING PRESSURE: 250 Bar / 3625 PSI
MAX TEMPERATURE: 150C
COUPLING (TO MACHINE): M22 Female
COUPLING (TO TRIGGER GUN): M22 Female
ENSURE DURING COLDER CONDITIONS, THE WATER IS DRAINED FROM THE HOSE PRIOR TO STORAGE
Not a genuine Nilfisk product
THE BRASS THREAD CONVERTER is a brass adaptor that screws onto the male screw thread on the water out pipe of the Nilfisk machine. One end of the hose will then screw onto this brass adaptor.
PTFE TAPE A roll of this is included to wrap around the female thread on the Nilfisk machine before screwing on the brass thread converter and then wrap around the male thread on the brass thread converter before then screwing the hose onto the converter.
12M Length x 12mm Wide
FULL BUNDLE CONTENTS
1 x Annovi Reverberi MV925 Quick Release Short Trigger With Built In Swivel
1 x 15m Reinforced Steel Wire Braided Rubber Hose
1 x Brass Thread Converting Adaptor
1 x 12m Roll Of PTFE Tape
1 x 15° Yellow 035 Nozzle
1 x 25° Green 035 Nozzle
1 x 40° White 035 Nozzle
1 x Quick Release Snowfoam Adaptor
NB. Pressure washer not included
COMPATIBLE NILFISK MACHINES:
C 120.6 X-TRA
C 110.7/ C 110.7 X-TRA
C 120.7/ C 120.7 X-TRA
C 125.7 X-TRA
Using the included PTFE tape, wrap a good quantity around the male end of the Nilfisk screw thread (where the water comes out), tighten the female end of the brass converter VERY tightly onto the Nilfisk male screw thread. Then wrap a smaller quantity of PTFE tape around the male thread of the brass converter before then screwing the 15m hose onto the same thread.