Bilt Hamber Auto Clay 200g
Bilt Hamber Auto Clay 200g
Bilt Hamber clay-bars are designed to effortlessly restore the factory smooth finish to paint finishes. They have received critical acclaim in the detailing industry for being the most durable, cost effective and well-designed clay-bars available today.
Auto Express Magazine, a giant in the car magazine world, has awarded auto-clay with their Best Clay Bar award every year for the last 5years!! Also they compared the clay-cloths to clay-bars in one recent test, where they concluded that bars were better, and that auto-clay was the pick of the bunch once again!
So which clay-bar do you need?
The choice between the auto-clay bars will depend on several factors:
If the vehicle is heavily contaminated, has never been clay-barred before, or it’s hot summertime then use Regular. All clay bars become firmer when cold and softer when warm.
For paintwork that is in a reasonable condition, Medium will be preferred.
The easier folding of the clay to expose a fresh working surface will be very beneficial.
If paint is in good condition, if you like to clay your vehicle frequently or indeed if the weather is cold, then use Soft.
Why use a clay-bar?
Assess the degree of embedded metallic and brake dust debris that has entered the surface of your paint film by gently rubbing the paint with fingertips.
Feel for the grittiness that these damaging particles impart to paint films.
Using Bilt-Hamber Clay-Bars - regular, medium or soft - you will effortlessly remove particles, leaving the paint glass-smooth. Discolouring road film will also be gently lifted.
Claying will make a world of difference when lubricated with plenty of water and hardly any pressure. The bar glides like an ice hockey puck, and is pleasant and satisfying to use.
Not only does the paint feel and look a lot better once clayed, but the removal of these objects sticking to the surface allows the next stages of paint care to progress far more smoothly. As now cleansers, waxes and polishes glide across the surface far more easily.
How To Use
Before use, get yourself a plastic sandwich type bag and insert your hand into it. Now rub the paintwork of your car and feel how rough or how smooth it feels.
Before using auto-clay thoroughly wash your car to remove any loose dirt. Direct sunlight should not fall on your car’s surface, and it’s best if the work area is relatively cool, but not cold.
To use, pinch off about a quarter or a fifth of the auto-clay and manage it into a palm sized flat piece. Now simply spray water with a plant mister or equivalent on a small area of your car and rub the palm sized piece of auto-clay back and forth with light pressure with your fingertips. auto-clay should glide across your paint; keep the paint surface wetted thoroughly. auto-clay must not be used dry. Listen to what you are doing carefully - at first you will hear the bar as it pulls the particles away from the paint, the noise and friction will disappear quickly.
After a few passes with auto-clay, again insert your hand into a plastic sandwich type bag and rub your fingers over the area to feel if the surface contamination was removed. Keep rubbing until all contamination is gone. Finally, wipe the clay residue off with a soft terrycloth towel. Just like waxing, work in small areas.
What you should see coming off of the car and depositing itself on the clay bar is a reddish brown residue, this is what you want to see. As the clay bar becomes soiled, simply fold it over squash it out and keep going. Under no circumstances should the clay bar be used if dropped on the ground, inside or out! The clay bar is good for about 4 or 5 cleans on the average sized car. Once the paint is clean, wax your car immediately.