Auto-Glanz Spritzer Foaming Pre Wash 60ml
You could spend hours protecting your vehicle with wax and then accidentally remove it all during a regular maintenance wash because you’ve used the wrong products. To stop this from happening, AutoGlanz have created Spritzer. Spritzer is a concentrated, mildly alkaline and non-caustic foaming citrus pre-wash with a lovely natural citrus scent.
The mildly alkaline formulation means that Spritzer Citrus Pre Cleaner does not degrade wax or protective layers and can be used on all vehicle surfaces without having to worry about sensitive finishes or trims. The added foaming properties ensure that all contaminants on the vehicle are lifted and safely removed from the surface before you make direct contact during your wash routine and therefore reduce the risk of causing any damage to the vehicle. Spritzer can be diluted up to 250:1 with water and has the ability to be used through either a dedicated foam lance or a Kwazar type foam sprayer for those who do not have access to a foaming lance.
One benefit of a foaming citrus pre-wash is that they have higher cleaning capabilities than a regular neutral Snowfoam, however, it has a much shorter dwell/work time, leaving you more time to concentrate on other parts of your routine.
SPRITZER STANDS OUT AS A CITRUS PRE CLEANER
Spritzer can be used as a direct replacement for a snow foam if desired, it is extremely effective where a stronger citrus pre-cleaner is needed without the risk of damaging or degrading any wax layers applied, Spritzer stands out from the crowd especially in winter months!!!
One benefit of a foaming citrus pre-wash is
- Gentle on Waxes and Sealants
- Higher cleaning capabilities than snow foam
- Lifts and safely removes contamination
- Dilutable up to 250:1 (Above 100:1 is LSP safe)
Conventional pre-cleaning – Between 25:1 to 250:1.
As a snow foam replacement – Between 25ml and 200ml mixed in a 1L foam bottle with warm water.
As a standalone cleaner – as desired, higher dilutions may degrade sensitive show waxes.
Directions for use:
1. Dilute Spritzer accordingly.
2. Apply directly to the vehicle's surface using a foaming lance or trigger sprayer.
3. Allow to dwell for a few moments, do not allow to dry on the surface.
4. Rinse thoroughly with high-pressure wash.